Gen code 10520001 2 Spacers for M5 bolt 22 x 4 mm

[Guest]

Welcome, Guest. Please login or register.
Did you miss your activation email?
February 09, 2012, 11:32:21 AM

1 Hour 1 Day 1 Week 1 Month Forever

Login with username, password and session length

[What is the main type of machine you use to surf the site?]

What is the main type of machine you use to surf the site?
Desktop
	100 (29%)
Laptop
	140 (41%)
iPhone
	44 (13%)
Android phone
	24 (7%)
Tablet
	15 (4%)
Other
	14 (4%)
Total Voters: 252

[Karl P]

Help pls...

I want two of the above, as detailed in in the tech docs for the Meta 5.5.
How/where do I order this bit of kit from?

More detailed question...I stripped down the contact system for my Meta 5.5.2, can anyone explain to me how I get the old bearings out of the bit that connects the swing arm to the triangle parts of the contact system...it's the long u shaped bit (it has 2 bearings and an internal spacer)?

And finally, the above spacers seem to be to protect the bearings from water etc. is there any risk with using the same spacers to protect the bearings in the "long u shaped bit"? They seem to fit nicely with no impact on movement.

Thanks in advance.

Karl.

[steveb]

I've no idea what those codes relate to, if you can supply a pic of what you need, I'll most likely have it.

All the bearings in Commies are interference fit, so just drift it out with brute force.

[Karl P]

Sorry, don't know how to inc. a picture.
See this link:
http://www.commencal.com/news/index_en.htm
The click on tech support, goto page 55 and see item 17 (in red).

Karl.